EHTM7030 | COM Express universal processing module | ZYNQ 7030 (ARM9 Dual-core + FPGA Framework) | 1GB DDR3 SDRAM, 512KB EEPROM for Boot, 8~64MB Flash for System | 2x 10/100/1G Ethernet ports, 2 IIC Ports, 2 Serial ports, JTAG and trace connectors, PCI–E X4 PORT, GPIOs x96 | vxWorks/Linux | Communications, Industrial Control, Embedded Computing, Internet Storage |
EHTP7045 | Software-defined radio platform | XC7Z045 SoC chip | Up to 4GB onboard DDRIII SDRAM | Standard FMC HPC Interface (supports AD9361), 4 SATA II/III extensions | Linux/vxWorks | Customizable, used in communication systems, signal processing platforms |
EHTP2020C | QorIQ P2020 e500 Power Architecture | Dual-core @ up to 1GHz | 1~4GB DDRIII SDRAM, 512KB EEPROM for Boot, 2GB NAND Flash for System, Micro SD card slot/bootable | 3x 10/100/1G Ethernet ports, 4x SerDes up to 3.125 GBps, 2 IIC Ports, 2 Serial ports, JTAG and trace connectors, 4 USB 2.0 ports, Real-time clock, 2 IEEE1588V2 ports | vxWorks/Linux | Used in communications, industrial control, embedded computing, national defense, data acquisition, aviation, space systems |
EHTP2020SBC6U | 6U CPCI Express single board computer | QorIQ P2020 e500 Power Architecture | 2~8GB DDRIII SDRAM with ECC, 512MB NOR Flash for Boot, 8GB NAND Flash for System | 3x 10/100/1G Ethernet ports, x4 PCI Express to XMC sites, Two PrPMC/XMC interfaces, 2 Serial ports, JTAG and trace connectors, 1 USB 2.0 port, Real-time clock | vxWorks/Linux | Used in communications, industrial control, embedded computing, national defense, data acquisition, aviation, space systems |
EHTDAQ6U | 6U CPCI universal signal processing platform | XC6VLX240T-1FFG1156I x2 (signal collect and processing), XC5VSX50T-1FFG665I x1 (global configuration and management) | 1GB DDRII SDRAM @ 64bit, 32MB NOR Flash | Gigabit Ethernet port, 32bit@66MHz CPCI Interface, 2 FMC Interfaces, 1 SDI Interface | ISE | Used in radar systems, software-defined radios |
EHTG12P | 10GB interface card | Freescale P4080 CPU, XC7VX485T FPGA | 4GB DDRIII SDRAM @ 64bit | 2x Gigabit Ethernet ports, backplane 12 RapidIO interfaces, 1x 10GB Ethernet, 1x TSI578 onboard RapidIO switch, 1x RS232 for debugging | vxWorks/Linux | Customizable, used in radar systems, software-defined radios |
EHTVPX-DV | 6U VPX 10GB processing card | XC7VX690T x2 (signal collect and processing), Freescale T2080 | 4GB DDRII SDRAM @ 64bit | 4x Gigabit Ethernet ports, 2x 10GB interfaces, 1 FMC interface, 2 fiber RapidIO interfaces (QSFP+), backplane 16x SRIO interface | vxWorks/Linux | Customizable, used in radar systems, software-defined radios |
EHTP4C250M16 | PCI Express 4 channel 250M 16-bit collect processing card | Based on Xilinx Kintex 7 FPGA (XC7VLX325T-2FFG900I) | 1GB DDRIII SDRAM | x8 PCI Express, 1 FMC HPC Interface, AD daughter card supports up to 250MHz 16-bit sampling | Provides Linux/Windows driver support and demo program | Customizable, used in communication systems, signal processing platforms |
EHT-FMC-SDR-PF | Multi-channel reconfigurable software-defined radio platform | High-performance multi-channel wideband RF transceiver, Zynq-7000 FPGA (built-in dual ARM core) | Various external interfaces, can customize daughter cards | SMA access, 2Tx, 2Rx channels, frequency range: 100MHz~6GHz | vxWorks/Linux | Customizable, used in radar systems, software-defined radios |
EHT-SBC-3U-P | PXIe framework monoboard computer | ZYNQ 7030 (ARM9 Dual-core + FPGA Framework) | 1GB DDR3 SDRAM, 512KB EEPROM for Boot, 8~64MB Flash for System | 1x 10/100/1G Ethernet port, 2x USB2.0 ports, 1x Serial port, 1x HDMI port, PCI-E x4 ports, 1x SATA2.0 slot | vxWorks/Linux | Used in communications, industrial control, embedded computing, network storage |
EHTP-DQ-36G | PCI Express 3.0 3.6Gsps collect processing card | Based on Xilinx Virtex 7 FPGA (XC7VX415T-2FFG1157I), XC7VX485T-2FFG1157I | 4GB DDRIII SDRAM | PCIe 3.0 interface, DMAXC7VX485T-2FFG1157I, 1 FMC HPC Interface | Provides Linux/Windows driver support and demo program | Customizable, used in communication systems, signal processing platforms |
EHT-AD-USB3 | USB3.0 collect transmitting module | Sampling channel quantity: 1, Maximum sampling frequency: 250MSps, Adjustable from 30M~180MHz, 1M step | Onboard buffer capacity ≥2GBit | Continuous sampling rate not less than 100MSps, USB3.0 transmission speed not less than 300MB/s | Windows OS driver program and application | Portable IF signal analyzer |
EHT-RIO-F2 | Dual channel fiber RapidIO card | Structure: XMC, PCIe Gen2 x8 support, 2 RapidIO interfaces | Onboard buffer capacity: 2GB | Provides Windows OS driver program and application | Avionics, communications | |
EHT-PXI-E-3U | 3U PXI Express reinforced collect control system monoboard computer | Zynq series XC7Z030 SoC chip system (optional) | 64 channel digital input card, 64 channel digital output card, 16 channel analog input card, 16 channel analog output card, CAN interface card, RS422/485 interface card, Ethernet interface card | vxWorks/Linux | Military, harsh environments of industrial applications | |
EHTM-AD9361 | Dual channel RF front-end FMC daughter card | Standard FMC daughter card, meets VITA57.1 standard | Access: SMA(50Ω), Channel quantity: 2Tx, 2Rx, Frequency range: 100MHz~6GHz | Tuning step: 1kHz, Tuning time: <4ms, Gain control range: 0~70dB, Gain control step: 1dB, Gain control mode: AGC and MGC optional | Software radio, communications | |
EHTM-AD4C250M | Four channel 250M 16 bits FMC daughter card | Standard FMC daughter card, meets VITA57.1 standard (FMC-HPC) | ADC: AD9467, Channel quantity: 4 channels, Sampling rate: Max 250Msps, Sampling resolution: 16bit | SNR: ≥70dBc@70MHz, 100Msps and -1dBFS; SFDR: ≥75dBc@70MHz, 100Msps and -1dBFS | Software radio, communications | |
EHTM-AD1C125M | Single channel 125M 16 bits FMC daughter card | Standard FMC daughter card, meets VITA57.1 standard (FMC-HPC) | ADC: AD9265, Channel quantity: single channel, Sampling rate: Max 250Msps, Sampling resolution: 16bit | SNR: ≥70dBc@70MHz, 100Msps and -1dBFS; SFDR: ≥75dBc@70MHz, 100Msps and -1dBFS | Software radio, communications | |
EHTM-AD1C3600 | Single channel 3.6G/dual channel 1.8G 12 bits AD sample FMC daughter card | Standard FMC daughter card, meets VITA57.1 standard (FMC-HPC) | ADC: AD12D1800, Channel quantity: single channel (3.6Gsps)/dual channel (1.8Gsps), Sampling rate: Max 3.6Gsps, Sampling resolution: 12bit | SNR: ≥52dBc@899MHz, 1.8GSps and -0.5dBFS; SFDR: ≥60dBc@899MHz, 1.8GSps and -0.5dBFS | Software radio, communications | |